--===============2302508577816754367==
Content-Language: en-CA
boundary="_000_BL0PR11MB3396E6A8DE177DD943DEF1BED18E2BL0PR11MB3396namp_"
--_000_BL0PR11MB3396E6A8DE177DD943DEF1BED18E2BL0PR11MB3396namp_
Content-Transfer-Encoding: quoted-printable
Michael,
I agree with Hank, your car did not come with this vertical panel but if yo=
u have the grille removed you should be able to install one. You will have =
to drill three holes, two in the horizontal panels and one in the bonnet h=
inge and cross brace assembly for the machined screw that holds the top of =
the vertical panel in place.
Jean
Sent from my Bell Samsung device over Canada=92s largest network.
________________________________
From: Healeys <healeys-bounces@autox.team.net> on behalf of Hank Leach via =
Healeys <healeys@autox.team.net>
Sent: Sunday, May 4, 2025 7:48:00 PM
To: Michael Salter <michaelsalter@gmail.com>; healeys@autox.team.net <heale=
ys@autox.team.net>
Subject: Re: [Healeys] Radiator apron
Michael-the early cars did not always have the center baffle panel. They h=
ad the lower horizontal "apron" you describe but the vertical "modesty " pa=
nel was added in late 53 into 54. Photo of my 53 #588 did not have the vert=
ical so you can see all the way thru the front. Since your car (#172?) is e=
arly; my guess is that you never had the panel. Are there mounting holes i=
n the horizontal apron to receive the lip of the vertical piece? The later =
parts available came with drilled holes. Not sure you could install one unl=
ess you remove the grille. Hank
--------------------
From: "Michael Salter" <michaelsalter@gmail.com>
To: <healeys@autox.team.net>
Sent: May 4, 2025 at 2:04 PM PDT
Subject: [Healeys] Radiator apron
I have a BN1 with the radiator apron panel (horizontal behind and below the=
grille in front of the radiator which usually has a division panel attache=
d to it) missing.
If I remove the horns and grille does anyone if this panel and the division=
panel can be installed. Looks a bit tight but I don't want to have to dist=
urb the front shroud.
Thanks.
M
--_000_BL0PR11MB3396E6A8DE177DD943DEF1BED18E2BL0PR11MB3396namp_
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
252">
</head>
<body>
<div dir=3D"auto" style=3D"font-family: Aptos, Aptos_MSFontService, -apple-=
system, Roboto, Arial, Helvetica, sans-serif; font-size: 12pt;">
Michael,</div>
<div dir=3D"auto" style=3D"font-family: Aptos, Aptos_MSFontService, -apple-=
system, Roboto, Arial, Helvetica, sans-serif; font-size: 12pt;">
I agree with Hank, your car did not come with this vertical panel but if yo=
u have the grille removed you should be able to install one. You will have =
to drill three holes, two in the horizontal panels and one in the bon=
net hinge and cross brace assembly for
the machined screw that holds the top of the vertical panel in place.</div=
>
<div dir=3D"auto" style=3D"font-family: Aptos, Aptos_MSFontService, -apple-=
system, Roboto, Arial, Helvetica, sans-serif; font-size: 12pt;">
<br>
</div>
<div dir=3D"auto" style=3D"font-family: Aptos, Aptos_MSFontService, -apple-=
system, Roboto, Arial, Helvetica, sans-serif; font-size: 12pt;">
Jean</div>
<div id=3D"ms-outlook-mobile-body-separator-line" dir=3D"auto"><br>
</div>
<div id=3D"ms-outlook-mobile-signature" dir=3D"auto" style=3D"font-family: =
Aptos, Aptos_MSFontService, -apple-system, Roboto, Arial, Helvetica, sans-s=
erif; font-size: 12pt;">
Sent from my Bell Samsung device over Canada=92s largest network.</div>
<hr style=3D"display:inline-block;width:98%" tabindex=3D"-1">
<div id=3D"divRplyFwdMsg" dir=3D"ltr"><font face=3D"Calibri, sans-serif" st=
yle=3D"font-size:11pt" color=3D"#000000"><b>From:</b> Healeys <healeys-b=
ounces@autox.team.net> on behalf of Hank Leach via Healeys <healeys@a=
utox.team.net><br>
<b>Sent:</b> Sunday, May 4, 2025 7:48:00 PM<br>
<b>To:</b> Michael Salter <michaelsalter@gmail.com>; healeys@autox.te=
am.net <healeys@autox.team.net><br>
<b>Subject:</b> Re: [Healeys] Radiator apron</font>
<div> </div>
</div>
<div>
<div>Michael-the early cars did not always have the center baffle panel.&nb=
sp; They had the lower horizontal "apron" you describe but the ve=
rtical "modesty " panel was added in late 53 into 54. Photo of my=
53 #588 did not have the vertical so you can see all the
way thru the front. Since your car (#172?) is early; my guess is that you =
never had the panel. Are there mounting holes in the horizontal apron=
to receive the lip of the vertical piece? The later parts available came w=
ith drilled holes. Not sure you could
install one unless you remove the grille. Hank<br>
-------------------- <br>
<br>
From: "Michael Salter" <michaelsalter@gmail.com> <br>
To: <healeys@autox.team.net> <br>
Sent: May 4, 2025 at 2:04 PM PDT <br>
Subject: [Healeys] Radiator apron </div>
<div>I have a BN1 with the radiator apron panel (horizontal behind and belo=
w the grille in front of the radiator which usually has a division panel at=
tached to it) missing.
<div>If I remove the horns and grille does anyone if this panel and the div=
ision panel can be installed. Looks a bit tight but I don't want to have to=
disturb the front shroud. </div>
<div>Thanks.</div>
<div> </div>
<div>M</div>
</div>
<div> </div>
</div>
</body>
</html>
--_000_BL0PR11MB3396E6A8DE177DD943DEF1BED18E2BL0PR11MB3396namp_--
--===============2302508577816754367==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============2302508577816754367==--
|