The fellow in the video, Elin Yakov, is a member of the Toronto Triumph
Club. His Youtube channel "Rusty Beauties" is well worth checking out.
Although he does work on other marques, much of what he does is on
Triumphs. Elin replaced the wiring in my TR3A with a kit from Advance Auto
Wire. The new wiring is modern (relays, fuses, etc.) and was originally
put together by Dan Masters.
Another Toronto Triumph Club member (and past President), Dave "Cheftush"
Tushingham also hosts a Youtube channel. He has done at least two TR3As
and documented the work on Youtube. He's done several videos about TR3A
steering. Here's one: https://www.youtube.com/watch?v=SRCtu3k65hc (this
video doesn't show how to get the stator tube out though).
Both Elin and Tush are really good guys.
Dave MacKay
1960 TR3A s/n 68639L
near Toronto, Canada
>Date: Fri, 12 Dec 2025 20:07:25 +0000
>From: dave northrup <dave@ranteer.com>
>Subject: Re: [TR] 58 TR3a steering removal
>
>This video is pretty good although its clearly this guy's first time
>
>https://duckduckgo.com/?q=how+to+remove+triumph+tr3+steering+wheel&atb=v4
66-1&ia=videos&iax=videos&iai=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D
QkST0Yw_9ys
>
>
>From: dave northrup
>Sent: Wednesday, December 10, 2025 4:14 PM
>To: triumphs@autox.team.net
>Subject: 58 TR3a steering removal
>
>I need to remove the stator tube, steering wheel, and worm gear on a 58
TR3a
>
>Are there instructions anywhere?
_______________________________________________
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|